ADDITIVE BOTTLE / CUTTING BOTTLE

APPLICATION :

  • Provides dry material supply to fill up bulk plant for oilfield use.
  • Used to fill up a bulk plant.
The additive bottle is designed to fill up storage plant with dry additives as cement, bentonite, baryte, (in sacks), etc… for oil- field use.

The fill and vent line are located on the side for easy access. A vent line is available for use with a dust collector.
The pressure relief valve provides safe unloading.
The interior is designed to allow dry material to flow out under air pressure.
The silo is equipped with multi-section air pad which requires minimum maintenance.

GENERAL SPECIFICATIONS
ON-SHORE OFF-SHORE
Norms : CODAP or ASME VIII CODAP or ASME VIII CODAP or ASME VIII
Diameter : mm (Ft) 1300 mm (4 Ft) 1300 mm (4 Ft)
Design Pressure : Bar (PSI) 4.1 Bar (61.9 PSI) 4.3 Bar (65 PSI)
Working Pressure : Bar (PSI) 2.8 Bar (42.3 PSI) 4.3 Bar (65 PSI)
Working Temperature : C° – 20 C° to 50 C° on request
Test Pressure 6.2 Bar (93.7 PSI) on request

 

[rev_slider alias=”cutbot”]

STANDARD DESIGN :

As follow vessel Code to CODAP or ASME VIII – Approved by DNV or BV – Heavy Duty Skid – Relief Valve – Fill Line – Discharge Line – Vent Line – Air Jet – Skid Type

OPTIONS :

Twin Additive Bottle.
Special design and equipment on request.

SPN DESCRIPTION CAPACITY
AD. BO / 35 Additive Bottle 35 CuFt
AD. BO / 70 Additive Bottle 70 CuFt
AD. BO / 120 Additive Bottle 120 CuFt
AD. BO / 220 Additive Bottle 220 CuFt
AD. BO / 350 Additive Bottle 350 CuFt
AD. BO / 120-BB Additive Bottle with big bag 120 CuFt
AD. BO / 220-BB Additive Bottle with big bag 220 CuFt
AD. BO / 350-BB Additive Bottle with big bag 350 CuFt