- Provides dry material transport and storage on Off-Shore oilfield.
- Used to set up a portable cement plant.
The Small Cement Silo is designed to store cement, bentonite, baryte, etc… for oilfield use.
It can be used for setting a portable bulk plant.
The fill and vent line are located on the side for easy access.
A vent line is available for use with a dust collector. The pressure relief valve provides safe unloading.
The interior is designed to allow dry material to flow out under air pressure. The small cement silo is equipped with multi- section air pad which requires minimum maintenance.
Manholes are located at the bottom and at the top for easy access.
The heavy duty skid is manufactured according to DNV 2.7.1 norms and drop test norms
The working position and transport position are identical.
It is easily transported on-shore and off-shore
|Norms :||DESP or ASME VIII||DESP or ASME VIII|
|Diameter : mm (Ft)||2400 mm (8 Ft)||2400 mm (8 Ft)|
|Design Pressure : Bar (PSI)||4.1 Bar (61.9 PSI)||4.3 Bar (65 PSI)|
|Working Pressure : Bar (PSI)||2.8 Bar (42.3 PSI)||4.3 Bar (65 PSI)|
|Working Temperature : C°||– 20 C° to 50 C°||on request|
|Test Pressure||6.2 Bar (93.7 PSI)||on request|
Approved by DNV or BV – DNV 2.7.1. Heavy Duty Skid – Relief Valve – Fill Line OD – Discharge Line – Vent Line – Air Pad
Electronic load cells – Parallel lines manifold – Sling Set according to DNV 2.7.1.
Special design and equipment on request
|SM-CE-SI / 2400 – 280||Small Cement SILO, diam 2400 mm,
with DNV 2.7.1 skid